mitsubishi_q_fx_plc_integration_guide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mitsubishi_q_fx_plc_integration_guide [2021/03/29 12:52]
wikiadmin 		mitsubishi_q_fx_plc_integration_guide [2021/03/29 12:53] (current)
wikiadmin
Line 4: Line 4:
  
 [[https://ergotech.com/contact?edit[cid]=6&edit[subject]=SECS/GEM for Mitsubishi PLC"|Contact us for more details.]] [[https://ergotech.com/contact?edit[cid]=6&edit[subject]=SECS/GEM for Mitsubishi PLC"|Contact us for more details.]]
 +
 +TransSECS supports full GEM300 integration - E39, E40, E87, E94 as well as SECS (E4, E5, E37) and GEM (E30). It supports applications that do not use GEM and SECSI (serial) connections - very useful for older tools.
  
 As with any TransSECS application, almost all GEM messages [[gem_tool_messages|]] are handled directly by TransSECS.  To build a complete application, all that is required is connect VIDs, CEIDs, and ALIDs.  Remote commands and recipes (S7 messages) may also be required. As with any TransSECS application, almost all GEM messages [[gem_tool_messages|]] are handled directly by TransSECS.  To build a complete application, all that is required is connect VIDs, CEIDs, and ALIDs.  Remote commands and recipes (S7 messages) may also be required.
  • mitsubishi_q_fx_plc_integration_guide.1617040362.txt.gz
  • Last modified: 2021/03/29 12:52
  • by wikiadmin